Basic Requirements Keep the device dry when it is stored, transported, and used.The power supply voltage of the device must meet the requirements for the input voltage of the device.
Keep the power plug clean and dry to prevent electric shocks or any. HG8245 can be mounted onto a wall or be placed on a workbench. Other installation modes are not allowed. Perform the following operations to mount HG8245 onto the wall. Step 1 Mark the positions of two holes, keeping the holes 72 mm from each other. Step 2 Select a proper drill according to the outer diameter of the screws. Step 1 Use an optical fiber to connect the OPTICAL port on the GPON terminal to the optical port in the wall. NOTE The optical connector connected to the OPTICAL port on the HG8245 is an SCAPC connector, and the type of the optical connector connected to the optical port in the. Step 1 Set the IP address of the PC in the same subnet 192.168.1.64 192.168.1.253. Example: - IP address: 192.168.1.100 - Subnet mask: 255.255.255.0 NOTE. The status of PON reflects the connection between GPON terminal and. The following table describes the status of the PON its upper-layer device indicator. Table 2 Indicator status description 2 Indicator Status Description The fiber connection between the terminal and the uplink Green steady on device is set up. Check whether the ONOFF button on the rear plane is depressed. User Information Personal or companys full name: AddressPostal Code. Huawei reserves all rights to interpret this limited warranty.
0 Comments
Leave a Reply. |
Details
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |